MAST FOR WIND TURBINE

The wind turbine mast is fixed to the deck or transom and balcony of any boat.

50.8 or 43 mm tube mast and with an upper bushing for the wind turbine of the appropriate size for each model.

As an accessory, it can include a rotating, adjustable and folding hanger arm to lift the auxiliary outboard.

All components in 316 stainless steel and Delrin bushings

It includes an adjustable clamp for fixing to the vertical or horizontal tube of the balcony and a tilting base for fixing on the deck or on the transom at any angle.

In each order we include the upper bushing to fit the wind turbine to the size specified by the client.

Outboard arm:

  • Installs at any height on the mast
  • Swivel and angle adjustable by wing nut
  • Folding
  • With complete rig included, interior pulleys and line inside the arm

The two renfort bars of 1 m. are prepared to be cut to the necessary size at the time of assembly.

They can be fixed to the mast at the preferred height and to the balcony in any position so as not to interfere with the outboard motor mount, accessories, etc.

The arm adapts to the most convenient length and angle.

Prices

  • Wind turbine mast (3 m x 50,8 mm tube)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . € 645 (€ 780,45 € VAT included) 
  • Wind turbine mast (3 m x 43 mm tube) with outboard crane and complete rig with pulleys  . . . . € 1.045  (€ 1.264,45 VAT included)

In each order we include the Delrin top fitting bushing for the wind turbine to the size indicated by the client.

The 3 m. mast is delivered in two 1.5 m. pieces with Delrin union bushing. It can be cut to a smaller size if necessary.

The 2 reinforcement braces of 1 m. in length are cut to the appropriate size at the time of assembly.

Includes all parts, hardware, etc. necessary for assembly, all in 316 stainless steel.

Freight: consult