Stern arch Energy Fix 50

The Energy Fix 50  stern archs are installed with basic tools and accept up to three photovoltaic panels.

With system of ball joints and wing nuts to easily orient the panels towards the position of the sun.

With accessories available to include davits for dinghy.

We have standard models and custom solutions. Any configuration is possible to adapt it to each particular case.

Do not hesitate to contact us and we will advise you without obligation.

We also have the new Energy Fix 30 model with double support made of 30 mm curved tube

We have a standard stern arch adaptable to most boats and we also offer special solutions tailored to customer needs.

STANDARD STERN ARCH

SPECIAL STERN ARCHS

STANDARD STERN ARCH

All the pieces that make up the arch, including the screws, rivets… are made of materials resistant to the marine environment: 316 stainless steel of nautical quality, Teflon and Delrin.

  • Any configuration is possible to find the best solution for each particular case.
  • The panels can be positioned above or below the awning.
  • The base of the masts can be anchored to the deck, coaming or transom.
  • It allows deciding the most appropriate inclination of the masts, depending on the position of the cleats or pieces of hardware, or to use them as davits for the auxiliary.

Two versions of telescopic upper frame, standard or extended for the installation of larger panels or to install the masts at a shorter distance from each other to hoist the dinghy adapting to its size.

 

With upper eyebolts for lifting the outboard or dinghy.

Standard stern arch accessories

We have reinforcement straps and additional masts to reinforce the set and davits for hoisting the dinghy.

Prices

Stern arch Energy Fix with standard frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.897 € (2.295,37 €  VAT included)

Stern arch Energy Fix with extended frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.040 € (2.468,40 € VAT included)

Accessories

Delrin bridges for fixing panels (4 units) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 € (70,18 € VAT included)

Bow reinforcement braces (2 units of 22 x 500 mm. complete with clamps and terminals) . . . . . . . . . . . . . . . . . . . . 138 € (166,98 € VAT included)

Additional masts aft (2 units of 30 x 2000 mm. complete with articulated base, clamp and terminals) . . . . . . . . . . . 402 € (486,42 € VAT included)

Davits 30 for dinghy (2 arms de 30 mm. with mounting accessories)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  269 € (325,49 € VAT included)

Reinforced davits 30 for dinghy (2 arms de 30 mm. with mounting accessories) . . . . . . . . . . . . . . . . . . . . . . .  407 € (492,47 € VAT included)

Davits 50 for dinghy (2 arms of 50.8 mm. with mounting accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  483 € (584,43 € VAT included)

 

Shipping included to the peninsula, other destinations: consult

SPECIAL CUSTOM STERN ARCHS

The Energy Fix system allows infinite solutions to customize your stern arch.

With adjustable panels above or behind the awning, aft or forward of the backstay, with or without davits or built-in outboard crane.

We can also design complete solutions that include:

  • Solar panels
  • davits
  • outboard crane
  • radar antenna
  • VHF and GPS antennas
  • etc.

In these diagrams we present some of the possible configurations.

Do not hesitate to ask us about your specific needs and we will study your case without obligation.

Endless Options

According to the needs of each case:

  • The bases can be anchored to the deck, transom or coaming.
  • The fixings to the balcony of the masts can be anchored in the stern area or on the sides of the balcony.
  • The masts, straight or angled, can be placed at the best angle depending on whether or not there is a bimini top, backstay, etc.
  • Joints can be included in the masts to advance or delay the position of the panels, above or below the awning.

Any configuration is possible. The masts can be anchored inside or outside the balcony, and the panels can be placed in any position: behind or above the awning, behind or in front of the backstay. Even on both sides of the backstay in assemblies of two longitudinal panels.

Two davits can also be incorporated at the preferred height and angle for dinghy stowage.

The ball-and-socket joint system allows the stern arch to be configured so that the solar panels remain horizontal above the bimini in port, under sail or in windy conditions and are raised in favorable conditions to orient them to the sun and increase their efficiency.

The system’s modular components allow for a wide variety of configuration options for your stern arch.

To design the best solution for you, do not hesitate to contact us and we will study your particular case according to your needs and the dimensions and shapes of your boat and we will advise you without obligation on the different options.